Back to top
   Call Me Free Send SMS Send Inquiry
Home » Products » Construction Chemicals » CRACK & FIX


Send Inquiry
Product Code : DF-R105, DF-H205
Brand Name : CRACK & FIX
Price And Quantity
  • Minimum Order Quantity
  • 4 can Liter/Liters
  • Price Or Price Range
  • INR
Product Description
CRACK FIX is a room temperature curing epoxy system suitable for concrete primer, epoxy Injection grouts, epoxy mortars, repairing compound and as binder between old and new concrete. Low mix viscosity of system permits high filler loading and exhibit outstandingmechanical and chemical resistance properties. It is a multipurpose system for various civil Applications.
Advantages :Primer, Grout, Mortar/Screed, Self leveling floors sealing of cracks in concrete structure Coating of civil structure, anti corrosive coating for steel bars.
Applications :Excellent adhesion to metal and concrete, Very low shrinkage contributing to good dimensional stability, High mechanical strength, both tensile and compressive, good vibration damping properties, Resistance to oil, fuels and many chemicals.

STEP 1: SURFACE PREPARATION The adherents must be thoroughly degreased with a good degreasing solvent (e.g. toluene, acetone tri-chloroethlylene) and abraded with coarse emery paper or chemically etched. Inadequately pre-treated substrates may not bond satisfactorily. 
STEP 2: APPLICATION Mix the resin and hardener until it forms a uniform mass. Apply thin coat of the mixture on both the surfaces, the mixed mass can be applied by brush or spatula on the surface to be adhered. Join the surfaces and apply pressure using tapes, clamps or bands. Remove the pressure after 6 ‐8 hours. Full strength is achieved within 24 hours. The mix must be used within its pot-life. For best results: Roughen, dry and degrees surfaces to be bonded. 
STEP 3: CURING Curing normally takes place at room temperature within about 24 hours depending on the ambient temperature but may be accelerated by the application of heat.
Storage and Handling :
The resin and hardener, when stored in their original containers and not exposed to undue heat or humidity as in outdoor open shades, will have a minimum shelf life of 2 years. As far as possible, direct contact of resin and hardener with the skin should be avoided as they might cause irritant on sensitive skins. It is advisable to wash off immediately in case of skin contact. Special barrier creams and cleansing creams are available commercially as additional safe guards. Please refer MSDS for detail safety instructions.
PACKING : 1.5 kg (Resin 1kg / Hardener 500 gms) 7.5 kg (Resin 5kg / Hardener 2.5kg)
Trade Information
  • FOB Port
  • Mundra Port
  • Payment Terms
  • Telegraphic Transfer (T/T), Cash Advance (CA), Cheque, Cash in Advance (CID)
  • Delivery Time
  • As per Requirement Week
  • Sample Available
  • Yes
  • Sample Policy
  • If order is confirmed we will reimburse the sample cost
  • Main Export Market(s)
  • Africa, Middle East, Western Europe, Eastern Europe, South America, North America, Central America, Australia, Asia
  • Main Domestic Market
  • West Bengal, Uttarakhand, Uttar Pradesh, Tripura, Telangana, Tamil Nadu, Sikkim, Rajasthan, Pondicherry, Punjab, Odisha, Nagaland, Manipur, Meghalaya, Mizoram, Maharashtra, Madhya Pradesh, Lakshadweep, Kerala, Karnataka, Jharkhand, Jammu and Kashmir, Himachal Pradesh, Haryana, Goa, Gujarat, Daman and Diu, Dadra and Nagar Haveli, Delhi, Chandigarh, Chhattisgarh, Bihar, Arunachal Pradesh, Assam, Andhra Pradesh, Andaman and Nicobar Islands, West India, East India, North India, Central India, South India, All India


No. 506, Parshwanath Business Park, Near Prahlad Nagar Garden, Ahmedabad - 380015, Gujarat, India
Phone :+918068096034
Mr Nirav Shah (Partner)
Mobile :+918068096034
Trust Stamp
Product Showcase
   Call Me Free Send SMS Send Inquiry